Where Inventory Meets Expertise

Our inventory covers virtually every electrical and electronic cable application imaginable. We maintain over 15,000 active SKUs, each engineered for performance, consistency, and compliance with UL, CSA, and RoHS standards. From heat-resistant wire to precision coaxial and multi-conductor control cable, we supply the materials that keep manufacturing, communications, and energy systems running 24/7.

At Custom Wire & Cable, every product line is backed by the same principle: deliver the best wire for the job and stand behind it. We combine deep industry knowledge with supply-chain efficiency to help clients meet tight schedules without compromising quality.

Find the Products You Need Fast.

Browse our full range of wire and cable products by category. Each product is clearly specified to help you quickly identify the right solution for your application.

EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE

Medium voltage cable selection is often driven by the installation method as much as the voltage class. This 5kV and 8kV shielded power cable group helps buyers compare conductor size, insulation and jacket thickness, finished diameter, amp ratings by installation type, and cable weight before requesting a quote. Use the table below to match the electrical design, routing method, and project specification for feeder, distribution, branch circuit, utility, or industrial power applications.

Showing 1–9 of 13 results

EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE

Item #	Item Name	Size (AWG/MCM)	Strands	Nominal Insulation Thickness (inches)	Nominal Jacket Thickness (inches)	Nominal O.D. (inches)	Current-Tray (Amps)	Current-Conduit (Amps)	Current-Duct (Amps)	Nominal Weight (LBS/MFT)	RFQ
25051	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	6	7	0.115	0.060	0.680	-	75	85	305	Request a Quote
25052	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	4	7	0.115	0.060	0.730	-	97	110	350	Request a Quote
25053	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	2	7	0.115	0.060	0.790	-	130	145	460	Request a Quote
25054	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	1	19	0.115	0.060	0.830	-	155	170	565	Request a Quote
25055	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	1/0	19	0.115	0.080	0.930	260	180	195	660	Request a Quote
25056	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	2/0	19	0.115	0.080	0.970	300	205	220	770	Request a Quote
25057	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	3/0	19	0.115	0.080	1.020	345	240	250	910	Request a Quote
25058	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	4/0	19	0.115	0.080	1.080	400	280	290	1055	Request a Quote
25059	EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE	250	37	0.115	0.080	1.120	445	315	320	1205	Request a Quote

Construction

Conductor:

Annealed copper conductor.

Insulation:

Extruded conductor shield, EPR ethylene-propylene-rubber insulation, extruded insulation shield, 0.005 inch copper shielding tape.

Jacket:

Black polyvinyl chloride jacket, surface printed.

Application:

Medium voltage MV-90 power cable for use in main feeder, distribution and branch circuits in industrial, commercial and electric utility installations. Cables may be used in wet or dry locations in circuits not exceeding 5000 volts 133% insulation level or 8000 volts 100% insulation level, at conductor temperatures not exceeding 90°C for normal, 130°C for emergency overload and 250°C for short-circuit conditions. Suitable for installation in conduit, tray, trough, ducts, aerial and direct burial applications.

Approvals:

Conforms to AEIC CS6 for ethylene propylene rubber Insulated shielded power cables.
Conforms to ICEA pub. no. S-68-516, NEMA pub. no. WC8 for ethylene-propylene rubber- insulated wire and cable.
Listed by UL as type MV-90, per standard 1072.
Listed by UL as sunlight resistant.
Sizes 1/0 and larger UL listed for CT use.
Conforms to federal specification J-C-30B.

Frequently Asked Questions

Shielded medium voltage power cable includes a metallic shield layer around the insulated conductor to help manage electrical stress and support reliable performance in higher-voltage systems. Shielding is commonly specified for medium voltage feeders, distribution circuits, utility systems, plant power, and industrial electrical installations.

The shield construction should match the system voltage, grounding method, installation environment, and project specification.

EPR-PVC medium voltage cable uses EPR insulation with a PVC jacket. EPR insulation is commonly selected for flexibility, electrical performance, and moisture resistance, while the PVC jacket adds an outer protective layer for the cable.

This construction may be used where a project requires shielded medium voltage power cable for feeder, distribution, branch circuit, utility, or industrial applications.

Amp ratings can vary by installation method because cable heat dissipates differently in tray, conduit, and duct environments. A cable installed in tray may have a different allowable ampacity than the same cable installed in conduit or underground duct.

When comparing products, use the amp rating that matches the actual installation method and confirm the final cable size against the project specification or electrical design.

CT use means the cable is suitable for cable tray use when the listed construction and size meet the applicable requirements. On this product group, CT use applies to sizes 1/0 and larger.

If the cable will be installed in tray, buyers should confirm the size, rating, installation conditions, and project specifications before ordering.

To choose the right cable, confirm the voltage class, conductor size, insulation level, shielding requirement, jacket material, installation method, ampacity requirement, and required footage. It is also important to know whether the cable will be installed in tray, conduit, duct, aerial, direct burial, wet location, or dry location conditions.

For quote requests, provide the AWG or MCM size, voltage rating, required length, installation method, and any project or utility specifications.

Popular Categories

Discover our most requested cable types used across multiple industries.

What Our Client Says

Custom Cable has been an exceptional partner for our engineering projects. Their team consistently delivers high-quality cable solutions on time, even for complex configurations.

We rely on Custom Cable for both standard and custom assemblies. Their communication, attention to detail, and fast turnaround have been outstanding.

Excellent quality and reliable support every time. From quoting to delivery, the process is seamless and makes my job easier.

Their expertise in custom fabrication and value-added services has been a game-changer for our production line. You can tell they know this business inside and out.

We’ve worked with many suppliers over the years, but none match Custom Cable's level of service, precision, and professionalism.

What Our Client Says

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

Speak with a wire and cable specialist today

Interested in cooperation or have questions? Just fill out the form and we will call you back. Or you can contact us via: info@gmail.com

Where Inventory Meets Expertise

Find the Products You Need Fast.

Product Catalog

EPR-PVC (5000/ 8000V Shielded) Type MV-105 Power Cable- Sunlight Resistant, CT USE

Popular Categories

What Our Client Says

What Our Client Says

Speak with a wire and cable specialist today

Can’t find what you’re looking for?

Product Enquiry