XLP Power Cable- 5,000V (Unshielded) Type MV-90

XLP Power Cable- 5,000V (Unshielded) Type MV-90

Array
(
    [0] => Application:

Where NEC jurisdiction applies as 5,000 volt non-shielded power cable, Type MV-90 Dry, for use at conductor temperatures not exceeding 90°C in dry locations. Cables meet requirements of Article 310-6 of the NEC.
For other applications, as non-shielded power cables for use at 5000 volts 100% insulation level (common system voltage 4160 volts) or 3000 volts 133% insulation level (common system voltage 2400 volts), under the following conditions:

Single conductors mounted on insulators in free air in indoor or outdoor locations.
Random lay singles in metal conduit or triplexed singles in non-metallic conduit, above grade, in dry locations.
Single conductors or triplexed singles, aerially, field-spun to grounded messenger in dry, damp or wet locations.
Triplexed singles in trays, in spaced block supports or in messenger supported rings, indoors above grade in dry locations.




    [1] => :

Where NEC jurisdiction applies as 5,000 volt non-shielded power cable, Type MV-90 Dry, for use at conductor temperatures not exceeding 90°C in dry locations. Cables meet requirements of Article 310-6 of the NEC.
For other applications, as non-shielded power cables for use at 5000 volts 100% insulation level (common system voltage 4160 volts) or 3000 volts 133% insulation level (common system voltage 2400 volts), under the following conditions:

Single conductors mounted on insulators in free air in indoor or outdoor locations.
Random lay singles in metal conduit or triplexed singles in non-metallic conduit, above grade, in dry locations.
Single conductors or triplexed singles, aerially, field-spun to grounded messenger in dry, damp or wet locations.
Triplexed singles in trays, in spaced block supports or in messenger supported rings, indoors above grade in dry locations.




    [2] => 
)